Agriwerk
vertical farm hvac
Adds lighting, equipment, people, envelope and ventilation heat flows at one supplied operating point, and converts evapotranspiration into a latent moisture-removal load. It is a steady-state sizing estimate without duct losses, thermal mass, equipment curves, controls, infiltration uncertainty or psychrometric state validation.
POST https://agri.halowerk.com/v1/vertical-farm-hvacEingaben
| Feld | Typ | Pflicht | Beschreibung |
|---|---|---|---|
| lighting_kw | number | Ja | |
| equipment_kw | number | Ja | |
| people_count | integer | Ja | |
| sensible_heat_per_person_w | number | Ja | |
| envelope_area_m2 | number | Ja | |
| envelope_u_value_w_per_m2k | number | Ja | |
| outdoor_temperature_c | number | Ja | |
| indoor_setpoint_c | number | Ja | |
| ventilation_m3_per_s | number | Ja | |
| evapotranspiration_l_per_hour | number | Ja |
Vollständiges Eingabeschema anzeigen
{
"type": "object",
"required": [
"lighting_kw",
"equipment_kw",
"people_count",
"sensible_heat_per_person_w",
"envelope_area_m2",
"envelope_u_value_w_per_m2k",
"outdoor_temperature_c",
"indoor_setpoint_c",
"ventilation_m3_per_s",
"evapotranspiration_l_per_hour"
],
"additionalProperties": false,
"properties": {
"lighting_kw": {
"type": "number",
"minimum": 0,
"maximum": 1000000
},
"equipment_kw": {
"type": "number",
"minimum": 0,
"maximum": 1000000
},
"people_count": {
"type": "integer",
"minimum": 0,
"maximum": 1000000
},
"sensible_heat_per_person_w": {
"type": "number",
"minimum": 0,
"maximum": 2000
},
"envelope_area_m2": {
"type": "number",
"minimum": 0,
"maximum": 100000000
},
"envelope_u_value_w_per_m2k": {
"type": "number",
"minimum": 0,
"maximum": 100
},
"outdoor_temperature_c": {
"type": "number",
"minimum": -100,
"maximum": 100
},
"indoor_setpoint_c": {
"type": "number",
"minimum": -50,
"maximum": 60
},
"ventilation_m3_per_s": {
"type": "number",
"minimum": 0,
"maximum": 1000000
},
"evapotranspiration_l_per_hour": {
"type": "number",
"minimum": 0,
"maximum": 100000000
}
}
}Veröffentlichtes Eingabebeispiel
{
"lighting_kw": 82,
"equipment_kw": 14,
"people_count": 5,
"sensible_heat_per_person_w": 90,
"envelope_area_m2": 1250,
"envelope_u_value_w_per_m2k": 0.42,
"outdoor_temperature_c": 31,
"indoor_setpoint_c": 22,
"ventilation_m3_per_s": 1.8,
"evapotranspiration_l_per_hour": 48
}Ergebnis & Dokumentation
Maschinenlesbare Dokumentation dieses Hubs
Quelle dieser Seite: der veröffentlichte HALOWERK-Katalog. Stand: 2026-11-01, 15:19 UTC.
Weitere Endpunkte dieses Hubs
- Agriwerk0,003 USDC
carbon capture
POSThttps://agri.halowerk.com/v1/carbon-captureConverts area, sampling depth, bulk density and initial/final organic-carbon mass fractions into stock estimates and a gross CO2-equivalent difference. This is a simple stock-difference calculation; it does not establish additionality, perm
- Agriwerk0,004 USDC
drone spray path
POSThttps://agri.halowerk.com/v1/drone-spray-pathBuilds parallel passes over an axis-aligned rectangle using supplied swath width and overlap, alternating travel direction to reduce deadhead distance. Coordinates are in caller-supplied local units. It does not use maps, terrain, wind, obs
- Agriwerk0,004 USDC
fertilizer map
POSThttps://agri.halowerk.com/v1/fertilizer-mapFor each field cell, subtracts measured available nutrient from a supplied target and divides positive deficits by an explicit recovery fraction. It reports per-hectare rates and area totals. It does not infer crop targets, validate laborat