HALOWERKAgriwerk
soil moisture
Runs a deterministic bucket balance for each supplied day. Rain is reduced by a caller-selected runoff fraction, evapotranspiration is subtracted, water above field capacity is reported as drainage, and storage is bounded at zero. This is a root-zone accounting model, not a sensor reading, weather forecast, hydraulic simulation or irrigation command.
POST https://agri.halowerk.com/v1/soil-moistureEingaben
| Feld | Typ | Pflicht | Beschreibung |
|---|---|---|---|
| initial_water_mm | number | Ja | Initial plant-available water in the modeled root zone. |
| field_capacity_mm | number | Ja | Maximum water stored by the modeled bucket. |
| rainfall_mm | array | Ja | |
| irrigation_mm | array | Ja | |
| evapotranspiration_mm | array | Ja | |
| runoff_fraction | number | Nein | Fraction of rainfall excluded as runoff. |
Vollständiges Eingabeschema anzeigen
{
"type": "object",
"required": [
"initial_water_mm",
"field_capacity_mm",
"rainfall_mm",
"irrigation_mm",
"evapotranspiration_mm"
],
"additionalProperties": false,
"properties": {
"initial_water_mm": {
"type": "number",
"minimum": 0,
"maximum": 10000,
"description": "Initial plant-available water in the modeled root zone."
},
"field_capacity_mm": {
"type": "number",
"minimum": 0.001,
"maximum": 10000,
"description": "Maximum water stored by the modeled bucket."
},
"rainfall_mm": {
"type": "array",
"minItems": 1,
"maxItems": 3660,
"items": {
"type": "number",
"minimum": 0,
"maximum": 5000
}
},
"irrigation_mm": {
"type": "array",
"minItems": 1,
"maxItems": 3660,
"items": {
"type": "number",
"minimum": 0,
"maximum": 5000
}
},
"evapotranspiration_mm": {
"type": "array",
"minItems": 1,
"maxItems": 3660,
"items": {
"type": "number",
"minimum": 0,
"maximum": 500
}
},
"runoff_fraction": {
"type": "number",
"minimum": 0,
"maximum": 1,
"description": "Fraction of rainfall excluded as runoff."
}
}
}Veröffentlichtes Eingabebeispiel
{
"initial_water_mm": 82,
"field_capacity_mm": 120,
"rainfall_mm": [
0,
8,
2,
0
],
"irrigation_mm": [
10,
0,
0,
12
],
"evapotranspiration_mm": [
4.2,
4.5,
4.8,
5
],
"runoff_fraction": 0.08
}Ergebnis & Dokumentation
Maschinenlesbare Dokumentation dieses Hubs
Quelle dieser Seite: der veröffentlichte HALOWERK-Katalog. Stand: 2026-11-01, 15:19 UTC.
Weitere Endpunkte dieses Hubs
- Agriwerk0,003 USDC
carbon capture
POSThttps://agri.halowerk.com/v1/carbon-captureConverts area, sampling depth, bulk density and initial/final organic-carbon mass fractions into stock estimates and a gross CO2-equivalent difference. This is a simple stock-difference calculation; it does not establish additionality, perm
- Agriwerk0,004 USDC
drone spray path
POSThttps://agri.halowerk.com/v1/drone-spray-pathBuilds parallel passes over an axis-aligned rectangle using supplied swath width and overlap, alternating travel direction to reduce deadhead distance. Coordinates are in caller-supplied local units. It does not use maps, terrain, wind, obs
- Agriwerk0,004 USDC
fertilizer map
POSThttps://agri.halowerk.com/v1/fertilizer-mapFor each field cell, subtracts measured available nutrient from a supplied target and divides positive deficits by an explicit recovery fraction. It reports per-hectare rates and area totals. It does not infer crop targets, validate laborat