Rechenwerk
geg heating rules
Applies §§ 42-46 GModG (Act of 23.07.2026, BGBl. 2026 I Nr. 226): gas, oil or LPG heating installed after 2026-07-29 must use at least 10 % (2029), 15 % (2030), 30 % (2035) and 60 % (2040) biomethane, bio-oil, biogenic LPG or green/blue/orange/turquoise hydrogen; solar thermal (0.04/0.03 m2 aperture per m2 floor area) or ventilation heat recovery (>= 73 %, COP >= 10) fulfil it 2029-2034; heat-pump hybrids fulfil it with >= 30 % (parallel) or >= 40 % (alternative) of the peak generator output.
POST https://rechen.halowerk.com/v1/geg-heating-rulesInputs
| Field | Type | Required | Description |
|---|---|---|---|
| building | string | Yes | existing building or new building (§ 10 GModG). |
| installation_date | string | Yes | Date the heating system is installed (from 2026-07-29 to 2030-12-31). |
| heating | string | Yes | Option under § 42(2) GModG: gas_oil_lpg_boiler, heat_pump, solar_thermal, biomass (solid biomass), hydrogen (heating for green/blue/orange/turquoise hydrogen), heat_pump_hybrid (heat pump + gas/oil/LPG peak boiler), solar_hybrid (solar thermal + gas/oil/LPG), biomass_hybrid (solid biomass + gas/oil/LPG), chp (high-efficiency CHP), direct_electric, heat_network_connection, other_innovative. |
| chp_fuel | string | No | For chp: fuel of the CHP unit. |
| dwellings | integer | No | Number of dwellings or other independent units in the building. |
| residential | boolean | No | Residential building (Wohngebäude). |
| owner_occupies_one_of_max_two | boolean | No | Building with at most two dwellings, one occupied by the owner (exceptions for direct electric heating). |
| envelope_better_than_required_percent | number | No | For direct_electric: how much the building falls below the building-envelope requirements of §§ 16 and 19 GModG (percent). |
| replaces_single_room_direct_electric | boolean | No | For direct_electric in existing buildings: replacement of an existing single-room direct electric heater (§ 46(2)). |
| hybrid | object | No | For heat_pump_hybrid. |
| solar | object | No | Solar thermal system used for § 43(3). |
| ventilation | object | No | Ventilation with heat recovery used for § 43(4). |
| irreparable_failure | boolean | No | Installation because the previous heating failed irreparably (§ 43(7)). |
Show full input schema
{
"type": "object",
"additionalProperties": false,
"required": [
"building",
"installation_date",
"heating"
],
"properties": {
"building": {
"type": "string",
"enum": [
"existing",
"new"
],
"description": "existing building or new building (§ 10 GModG)."
},
"installation_date": {
"type": "string",
"format": "date",
"description": "Date the heating system is installed (from 2026-07-29 to 2030-12-31)."
},
"heating": {
"type": "string",
"enum": [
"gas_oil_lpg_boiler",
"heat_pump",
"solar_thermal",
"biomass",
"hydrogen",
"heat_pump_hybrid",
"solar_hybrid",
"biomass_hybrid",
"chp",
"direct_electric",
"heat_network_connection",
"other_innovative"
],
"description": "Option under § 42(2) GModG: gas_oil_lpg_boiler, heat_pump, solar_thermal, biomass (solid biomass), hydrogen (heating for green/blue/orange/turquoise hydrogen), heat_pump_hybrid (heat pump + gas/oil/LPG peak boiler), solar_hybrid (solar thermal + gas/oil/LPG), biomass_hybrid (solid biomass + gas/oil/LPG), chp (high-efficiency CHP), direct_electric, heat_network_connection, other_innovative."
},
"chp_fuel": {
"type": "string",
"enum": [
"gas_oil_lpg",
"biomass_or_hydrogen"
],
"description": "For chp: fuel of the CHP unit."
},
"dwellings": {
"type": "integer",
"minimum": 1,
"maximum": 10000,
"default": 1,
"description": "Number of dwellings or other independent units in the building."
},
"residential": {
"type": "boolean",
"default": true,
"description": "Residential building (Wohngebäude)."
},
"owner_occupies_one_of_max_two": {
"type": "boolean",
"default": false,
"description": "Building with at most two dwellings, one occupied by the owner (exceptions for direct electric heating)."
},
"envelope_better_than_required_percent": {
"type": "number",
"minimum": 0,
"maximum": 100,
"description": "For direct_electric: how much the building falls below the building-envelope requirements of §§ 16 and 19 GModG (percent)."
},
"replaces_single_room_direct_electric": {
"type": "boolean",
"default": false,
"description": "For direct_electric in existing buildings: replacement of an existing single-room direct electric heater (§ 46(2))."
},
"hybrid": {
"type": "object",
"additionalProperties": false,
"required": [
"heat_pump_kw_point_a",
"peak_generator_kw",
"operation"
],
"description": "For heat_pump_hybrid.",
"properties": {
"heat_pump_kw_point_a": {
"type": "number",
"exclusiveMinimum": 0,
"maximum": 100000,
"description": "Heat pump output at part load point A under DIN EN 14825 (kW, from the data sheet)."
},
"peak_generator_kw": {
"type": "number",
"exclusiveMinimum": 0,
"maximum": 100000,
"description": "Output of the peak load generator (kW)."
},
"operation": {
"type": "string",
"enum": [
"parallel",
"partly_parallel",
"alternative"
],
"description": "Bivalent operating mode."
}
}
},
"solar": {
"type": "object",
"additionalProperties": false,
"required": [
"aperture_m2",
"useful_floor_area_m2"
],
"description": "Solar thermal system used for § 43(3).",
"properties": {
"aperture_m2": {
"type": "number",
"minimum": 0,
"maximum": 100000
},
"useful_floor_area_m2": {
"type": "number",
"exclusiveMinimum": 0,
"maximum": 10000000
}
}
},
"ventilation": {
"type": "object",
"additionalProperties": false,
"required": [
"heat_recovery_percent",
"coefficient_of_performance",
"whole_building"
],
"description": "Ventilation with heat recovery used for § 43(4).",
"properties": {
"heat_recovery_percent": {
"type": "number",
"minimum": 0,
"maximum": 100
},
"coefficient_of_performance": {
"type": "number",
"minimum": 0,
"maximum": 100
},
"whole_building": {
"type": "boolean"
}
}
},
"irreparable_failure": {
"type": "boolean",
"default": false,
"description": "Installation because the previous heating failed irreparably (§ 43(7))."
}
}
}Published input example
{
"building": "existing",
"installation_date": "2026-11-15",
"heating": "gas_oil_lpg_boiler",
"dwellings": 1
}Result & documentation
Machine-readable documentation of this hub
Source of this page: the published HALOWERK catalog. Updated: 2026-11-17 UTC.
More endpoints in this hub
- Rechenwerk0.003 USDC
ai act risk class
POSThttps://rechen.halowerk.com/v1/ai-act-risk-classEvaluates the caller’s description against Regulation (EU) 2024/1689 as amended by Regulation (EU) 2026/1744: prohibited practices of Art. 5(1)(a)-(h) and the new points (ba) and (bb) (from 2 December 2026); high-risk under Art. 6(1) (safet
- Rechenwerk0.002 USDC
annuity schedule
POSThttps://rechen.halowerk.com/v1/annuity-scheduleMonthly annuity in arrears as used by German banks: rate = loan × (nominal rate + initial repayment rate) / 12, or from a term via A = L·q^n·(q−1)/(q^n−1) with q = 1 + i/12; interest each month = balance × i/12 (30/360), rounded to cents, t
- Rechenwerk0.002 USDC
appeal deadlines
POSThttps://rechen.halowerk.com/v1/appeal-deadlinesCovers only clearly codified periods: Berufung one month and grounds two months (§§ 517, 520(2) ZPO), Revision one and two months (§§ 548, 551(2) ZPO), labour court appeal (§ 66(1) ArbGG), all starting with service of the complete judgment